preamble
A masturbator is much more pleasant to use when cleaned immediately after each session. Leaving it moist or still containing lubricant and body fluids promotes odors, deposits and, in the most serious cases, the development of mold.
The good reflex is therefore to clean the product as soon as possible, then let it dry completely before storing it. The exact method depends on the material and the possible presence of an engine or electronic components.
Why not wait several days?
The longer the residues remain in the canal, the more difficult it becomes to remove. On a soft masturbator, the folds and internal textures can retain lubricant and humidity even if the exterior seems clean.
Cleaning right after use
Start by checking whether the sheath is removable and if the product is completely waterproof. Never immerse an electrical appliance in the water if the manufacturer does not allow it.
For a washable part:
- Rinse the canal with lukewarm water; ;
- Apply a mild cleaner compatible with the material or product recommended by the manufacturer; ;
- Gently clean the accessible reliefs without swiftly pulling on the material; ;
- Rinse thoroughly so that no cleanser residue is left; ;
- Let the water flow before drying.
Avoid boiling water unless the instructions explicitly indicate that high temperature sterilization is possible. Many TPE, glues, motors and assembled elements can be damaged by excessive heat.
If the cleaning has been forgotten for one night
A one-time forgetting does not necessarily mean that the masturbator should be discarded. Clean it as soon as you realize it and carefully inspect the channel.
If the residue has dried, let lukewarm water circulate for a few moments to soften them rather than scraping the surface. Repeated gentle cleaning is better than aggressive rubbing that could tear the material.
After several days: be more careful
If the product has been left dirty and moist for several days, the simple fact that it «looks clean» after rinsing is not always enough. Very porous materials are more difficult to completely sanitize.
Clean it according to the manufacturer's instructions, then inspect the entire surface, especially the deep areas of the channel. If there is an unusual smell, a new color, a viscous texture or spots, it is better not to reuse it.
Do not automatically pour alcohol, bleach or household disinfectant into the canal. These products can degrade certain materials and leave irritant residues.
What if the masturbator has mold?
If you see mold stains, especially inside a TPE masturbator or porous material, the safest solution is to replace the product.
Trying to scratch visible stains does not guarantee that the material is deep clean. Mold can enter hard-to-reach areas, and repeated use of a contaminated product is not worth the risk.
For a non-porous silicone component, some manufacturers allow specific disinfection methods, but they are entirely dependent on the product construction. Follow the manual rather than a universal method found on the Internet.
Drying: the often forgotten step
A perfectly washed product can still develop a bad smell if it is still stowed wet.
After rinsing, gently shake off excess water and allow the canal to dry in a clean, ventilated place. For a deep model, a drying rack or an absorbent accessory recommended by the manufacturer can facilitate moisture wicking.
Avoid storing the product immediately in an airtight container when it is still wet.
Do I have to flip the sheath?
It depends on the model. Some flexible sheaths are designed to be turned over to facilitate washing; Others may tear or deform if they are reversed.
If the instructions do not clearly indicate that the sheath can be turned over, clean it without forcing. Use the water flow and your own fingers to reach accessible internal areas.
After drying maintenance powder
Some TPE masturbators become slightly sticky after washing. Once perfectly dry, they can receive a thin layer of compatible maintenance powder if the manufacturer recommends it.
Silicone masturbators generally do not need this step, unless otherwise specified.
How to properly store a masturbator?
Once clean and dry, keep it away from humidity, direct sun and high temperatures.
Avoid leaving multiple soft sex toys in prolonged contact with each other, as some materials may react or be marked. A clean pouch, the original box or individual storage is preferable.
Also, do not put heavy objects on a very flexible masturbator: prolonged compression can deform its shape.
Case of electrical models
For an automatic masturbator, clean only the areas provided to come into contact with the water. If the sheath is removed, wash it separately and wipe the body of the appliance according to the instructions.
Check that the charging port is completely dry before plugging in the product. Do not use a device with a cracked housing or that has water infiltration.
How to avoid odors and mold?
Prevention is mainly based on four simple habits:
- Clean as soon as possible after use; ;
- Fully rinse lubricant and residue; ;
- Let the canal dry to the end; ;
- Store the product in a dry, clean place.
If you rarely use your masturbator, inspect it before each new use. A cracked surface, suspicious stain, persistent odor or a significant change in texture are good reasons not to take any risks.
conclusion
Maintaining a masturbator is not complicated when done regularly. The problem comes mainly from products left dirty or wet for several days.
Captain – 5 suction 10 vibration simulated vaginal entry male masturbator49,99€View product
Clean with lukewarm water and a compatible product, rinse thoroughly, let dry completely then store the masturbator dry. And if a real mold appears in a porous material, replace the product rather than trying to recover it.
A few minutes of maintenance after each use avoids the majority of problems and helps to maintain good feelings for longer.
French 
English (United States) 
German 
Spanish 
Portuguese 
Italian 
English (UK)