Cleaning a masturbator is relatively simple. Drying completely is often more difficult, especially when the canal is long, narrow or very textured. However, storing a still wet sleeve promotes odors, the degradation of the material and the development of microorganisms.
The objective is not to heat the product strongly, but to remove the water gradually without damaging the internal textures.
Step one: absorb visible water
After rinsing, gently squeeze the masturbator to drain as much water as possible. Do not twist it or pull hard on the material.
Shande Jelly Cup Manual Masturbation Pack of 6 in a boxView product
For outdoor use, use a clean, soft, lint-free cloth. A thick, moisture-resistant wipe or a cloth is better suited than very thin paper that may tear and leave fibers.
Preferably choose a light, no printing fabric to reduce the risk of color transfer on very flexible materials.
Step two: dry the interior with a soft accessory
Spirals, folds and internal chambers easily retain small amounts of water. An elongated absorbent accessory can therefore be useful.
A stick or a stem with a soft foam allows you to reach the bottom without scratching the canal. The material should be flexible enough not to hang the reliefs.
Slowly insert it, turn slightly then remove it. If the accessory comes out very wet, use a clean and dry second rather than continuing with the same.
The objective is not to force to the bottom at all costs: on a narrow channel, an accessory that is too wide can tear the material.
Are moisture absorbers useful?
A desiccant bag can help maintain a dry environment afterwards that the masturbator has already been properly dried.
It should not replace air drying. Locking a still wet product with a small sachet of silica does not instantly remove the trapped moisture in the canal.
If you are using a desiccant, keep it in its bag intact and avoid direct contact of the pellets with the sex toy. Replace the bag when it is saturated as indicated by the manufacturer.
Should the masturbator be stored in an airtight bag?
A closed pouch protects the product from dust once it is Totally dry. On the other hand, it becomes a bad choice if humidity remains inside, since it prevents this water from evaporating.
2 in 1 automatic penis pump with 3 Moruoy suction modesView product
The correct sequence is therefore:
- rinse; ;
- drain water; ;
- absorb visible moisture; ;
- Allow air to dry; ;
- Check the channel; ;
- Only then store in a clean pouch.
An opaque pocket can be chosen for more discretion. Just make sure it is also dry and clean.
Can you use a hair dryer?
Avoid hot air directly on the TPE or other sensitive materials. Heat can soften, deform or accelerate product aging.
If you want to accelerate drying slightly, favor air circulation at room temperature and keep sufficient distance. The safest is to leave the masturbator in a clean and ventilated place.
Do not place it on a radiator or expose it to direct sunlight.
And for an electric masturbator?
If the sleeve is removable, dry it separately from the motorized part. This makes it easier to access the channel and avoids leaving moisture near the motor or electrical contacts.
The shell and the engine are cleaned according to the sealing level indicated in the instructions. Do not immerse the complete appliance in water simply because the sleeve itself is washable.
Before reassembling the product, check that all parts are dry, especially around the connectors.
Some useful habits
- Clean the sex toy immediately after use rather than the next day.
- Use a lint-free cloth for the outdoors.
- Prefer several gentle passages to a forced insertion of a large absorbent accessory.
- Always leave a drying phase in the air.
- Never enclose a wet sleeve in a box or bag.
- If you often use your masturbator, having a second model allows the first to dry completely without precipitation.
How do you know if it's really dry?
The canal should no longer leave any water mark on a clean absorbent accessory. It should also not give off a feeling of humidity when you press the sleeve lightly.
If an unusual smell appears despite cleaning or if suspicious stains develop, do not continue to use the product without identifying the problem. A material that has become impossible to clean properly must be replaced.
conclusion
To properly dry a masturbator, avoid shortcuts. First absorb the outside water, gently remove the moisture from the canal and let the product air dry completely before storing it.
A desiccant and a closed pouch can then help with storage, but only once the product is already dry. This simple routine protects the material, limits odors and makes the next use much more hygienic.
French 
English (United States) 
German 
Spanish 
Portuguese 
Italian 
English (UK)