preamble
You can buy a good quality masturbator and yet damage it quickly with a bad lubricant, incomplete drying or too wet storage.
The lifespan depends on the material, frequency of use, cleaning and storage.
Why don't two identical masturbators age the same?
A product used every day undergoes more friction, washing and stretching than a model used occasionally. Aging also depends on the pressure exerted on the inlet, the amount of lubricant and how the channel is cleaned.
TPE, for example, is very flexible but requires more precautions than a high quality silicone. Some materials can become more sticky over time, tear at the entrance or hold back more odors.
Making a masturbator «rest» is not a scientific method of regeneration of the material. On the other hand, alternating between several products can simply reduce the frequency of wear of each.
Clean immediately after use
The best way to preserve the sleeve is to wash it without waiting. Rinse the inside with warm water and use a gentle cleaner compatible with the material if necessary.
Gently press the channel to circulate the water. Avoid nails, hard brushes and any sharp objects that could hang on the internal reliefs.
After rinsing, drain as much water as possible and allow the product to dry completely. A still wet canal enclosed in a box is much more likely to develop a bad smell or mold.
Choose the right lubricant
The lubricant directly influences the state of the matter. For most TPE or silicone masturbators, a water-based lubricant is the safest choice, unless otherwise specified by the manufacturer.
Avoid products containing a lot of alcohol, essential oils or irritating ingredients. Oily lubricants may deteriorate some elastomers, and silicone lubricants may be incompatible with some silicone toys.
It is not necessary to look for a particular «medical» ingredient. The important thing is that the product is intended for intimate use and compatible with your sex toy.
Do not crush or stick the toys together
A very flexible masturbator can deform if it stays under heavy objects for a long time.
Also separate sex toys made in different materials. Some flexible plastics or TPEs can react to prolonged contact with other materials and make the surface sticky.
A clean fabric pouch or individual packaging also prevents the dust from being attached to a slightly grippy sleeve.
Avoid overdisinfection
More disinfectant doesn't mean more safety. Alcohol, bleach or aggressive household products can damage the material and irritate the skin if they remain in the canal.
Follow the manufacturer's recommendations. For a classic masturbator, careful washing with lukewarm water and a compatible cleaner is usually sufficient after each use.
Use pills or disinfectant solutions only if their manufacturer explicitly indicates that they are suitable for the material concerned.
Drying: the most important point
In a humid climate, drying can take time. Leave the sleeve open in a clean, ventilated place. A specially designed absorbent stick for masturbators can help remove residual moisture from the canal.
Avoid randomly introducing desiccants that may release particles or substances not intended for contact with a sex toy.
Can we «restore» a sleeve that has hardened?
Better to be careful with homemade recipes. Heat a masturbator to 60°C, apply baby oil and then put it in the refrigerator or freezer can change the material unpredictably.
If the sleeve has hardened, melted, swollen, cracked or greatly changed in texture, these are signs of aging. No domestic treatment guarantees that it returns its safety or original properties.
For a slightly sticky TPE, a compatible maintenance powder can sometimes improve the outside touch.
When should I replace it?
It's time to consider a new masturbator when you observe:
- a tear at the entrance or in the channel; ;
- a surface that has become abnormally sticky or oily; ;
- stains or traces of mold; ;
- a persistent smell despite several cleanings; ;
- a hardened, crumbly or cracked texture; ;
- repeated irritation after use; ;
- A channel that you can no longer clean properly.
An irritation or burning alone does not prove that the material «releases toxins». It can also come from lubricant, friction or a cleaning product.
What to look at when buying
A high price is not an absolute guarantee, but some information is reassuring: clearly indicated material, identifiable manufacturer, precise care instructions and protective packaging.
Avoid products with a strong unexplained chemical odor, sheets without any material information or vendors unable to specify maintenance conditions.
The sharpness of the internal textures is not scientific proof of quality, but a clean and flawless molding remains preferable.
Captain – 5 suction 10 vibration simulated vaginal entry male masturbator49,99€View product
conclusion
The lifespan of a masturbator depends much more on its actual condition than a fixed number of months or years. Good maintenance is mainly to use a compatible lubricant, quickly clean, dry completely and store the product separately.
Do not try to save at all costs a sleeve that has cracks, molds or significant degradation. A masturbator is an intimate object in direct contact with the skin: when its condition becomes doubtful, replacing it is more reasonable than attempting a homemade restoration.
French 
English (United States) 
German 
Spanish 
Portuguese 
Italian 
English (UK)